[rešeno] Plavi ekran (BSOD) i restartovanje nakon WinXP SP3 update-aImam laptop Acer Aspire 5315 (Intel procesor), sa instaliranim Windows XP-om (SP2). Juce sam hteo da ga update-ujem na Service Pack 3, i tu pocinju problemi. Instalacija se lepo zavrsila, i na kraju mi je ponudjeno da restartujem kompjuter, sto sam ja i ucinio... Avaj, od tada vise ne mogu da ga startujem, ne radi ni Safe Mode (nijedna od tri opcije), ne postizem nista ni opcijom "Last Known Good Configuration". Ucitavanje Windows-a uvek dodje do crnog ekrana sa Windows logoom i nakon par sekundi izbaci plavi ekran i restartuje kompjuter. Onemogucio sam automatsko restartovanje, i evo sta na plavom ekranu pise:
Citat:
A problem has ben detected and windows has been shutdown to prevent damage to your computer.
If this is the first time you have seen this Stop error Screen, restart your computer . If this screen appears again follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver update. Try changing video adapter.
Check with your hardware vendor for any BIOS update. Disable BIOS memory option such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000007E (0xC0000005, 0x805A8018, 0xF78AA530, 0xF78AA2CC)
If this is the first time you have seen this Stop error Screen, restart your computer . If this screen appears again follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver update. Try changing video adapter.
Check with your hardware vendor for any BIOS update. Disable BIOS memory option such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000007E (0xC0000005, 0x805A8018, 0xF78AA530, 0xF78AA2CC)
Nasao sam po internetu da se ovo zna desavati prilikom update-a na SP3 (doduse uglavnom na AMD konfiguracijama), ali nijedno od resenja kod mene (jos uvek) ne radi. Probao sam Windows Repair uz pomoc XP SP2 diska, zavrsi sve i nakon restarta opet isto (cak sam probao i sa SP3 diskom). Probao sam da promenim vrednost preko Recovery prompta registry parametru "intelppm" (disable intelppm), nista. Probao sam "chkdsk /r", kaze da je nasao neke greske i ispravio ih, ali opet isto prilikom podizanja sistem - plavi ekran, restart.
Ne znam da li ima neke veze, ali kada sam prvi put ubacio XP disk (hteo da probam Windows Repair), pisalo mi je da ne moze da nadje hard disk. Nasao sam resenje na netu -- u BIOS-u sam promenio vrednost opcije "SATA mode" na "IDE mode" (bilo je "AHCI mode"). Ne znam da li je ovo bitno, ali ne skodi da pomenem. Mozda citav problem i jeste u SATA drajverima? Nakon izbora opcije "IDE mode" boot sa XP diska pronalazi moj hard disk i sve radi normalno, osim sto se i dalje svaki pokusaj startovanja sa hdd-a zavrsava plavim ekranom i restartom.
Svaka pomoc dobrodosla, hvala unapred.
EDIT: Dodat tag [reseno] u naslov teme.
[Ovu poruku je menjao ((BugA)) dana 09.01.2010. u 11:15 GMT+1]
Re: Plavi ekran (BSOD) i restartovanje nakon WinXP SP3 update-a
Kad je sistem instaliran, nije jos bila izasla sedmica, a Vistu nisam hteo. Inace mi je cilj bio da opravim trenutni sistem (XP), a kako to izgleda nije moguce, zbog kompatibilnosti sa nekim starijim softverom koji koristim i ovoga puta cu (probati) da instaliram XP.