[es] - Nesto mi sumnjivo u syslogu...

sadux

Član broj: 5320
Poruke: 968
*.inffo.net.

Jabber: sadux@elitesecurity.org
ICQ: 337176241

+1 Profil

^{01.08.2005. u 04:56 - pre 227 meseci}

Moze li neko da mi objasni sta je ovo,posto sam slucajno pogledao....

Code:
Aug  1 04:46:36 localhost pppd[5554]: pppd 2.4.2 started by sadux, uid 501
Aug  1 04:46:36 localhost pppd[5554]: Using interface ppp0
Aug  1 04:46:36 localhost pppd[5554]: Connect: ppp0 <--> /dev/ttyS0
Aug  1 04:46:36 localhost netplugd[3020]: ppp0: ignoring event
Aug  1 04:46:42 localhost pppd[5554]: PAP authentication succeeded
Aug  1 04:46:43 localhost pppd[5554]: Received bad configure-ack:
Aug  1 04:46:43 localhost pppd[5554]: local IP address 212.200.150.185
Aug  1 04:46:43 localhost pppd[5554]: remote IP address 212.200.150.1
Aug  1 04:46:43 localhost pppd[5554]: primary DNS address 212.200.150.2
Aug  1 04:46:43 localhost pppd[5554]: secondary DNS address 212.200.150.11
Aug  1 04:46:43 localhost netplugd[3020]: ppp0: ignoring event
Aug  1 04:46:43 localhost netplugd[3020]: ppp0: ignoring event
Aug  1 04:46:46 localhost pppd[5554]: Received bad configure-ack:
Aug  1 04:47:10 localhost  last message repeated 8 times
Aug  1 04:47:13 localhost pppd[5554]: CCP: timeout sending Config-Requests
Aug  1 05:04:42 localhost pppd[5554]: Terminating on signal 15.
Aug  1 05:04:42 localhost netplugd[3020]: ppp0: ignoring event
Aug  1 05:04:42 localhost netplugd[3020]: ppp0: ignoring event
Aug  1 05:04:42 localhost pppd[5554]: Hangup (SIGHUP)
Aug  1 05:04:42 localhost pppd[5554]: Modem hangup
Aug  1 05:04:42 localhost pppd[5554]: Connection terminated.
Aug  1 05:04:42 localhost pppd[5554]: Connect time 18.1 minutes.
Aug  1 05:04:42 localhost pppd[5554]: Sent 60724 bytes, received 655555 bytes.
Aug  1 05:04:42 localhost netplugd[3020]: ppp0: ignoring event
Aug  1 05:04:42 localhost pppd[5554]: Connect time 18.1 minutes.
Aug  1 05:04:42 localhost pppd[5554]: Sent 60724 bytes, received 655555 bytes.
Aug  1 05:04:42 localhost pppd[5554]: Exit.
Aug  1 05:13:02 localhost drakconf.real[5984]: ### Program is starting ###
Aug  1 05:13:08 localhost drakconf.real[6003]: ### Program is starting ###
Aug  1 05:13:20 localhost logdrake[6013]: ### Program is starting ###
Aug  1 05:13:29 localhost logdrake[6017]: ### Program is starting ###
Aug  1 05:14:33 localhost drakconf.real[6003]: modified file /etc/mcc.conf
Aug  1 05:14:35 localhost drakconf.real[6024]: ### Program is starting ###
Aug  1 05:14:40 localhost drakconf.real[6041]: ### Program is starting ###
Aug  1 05:14:45 localhost logdrake[6051]: ### Program is starting ###
Aug  1 05:26:55 localhost kernel: end_request: I/O error, dev fd0, sector 0
Aug  1 05:26:56 localhost  last message repeated 2 times
Aug  1 05:30:09 localhost userdrake[6067]: ### Program is starting ###
Aug  1 05:30:17 localhost userdrake[6067]: modified file /etc/sysconfig/userdrake
Aug  1 05:30:18 localhost drakxservices[6070]: ### Program is starting ###
Aug  1 05:30:19 localhost drakxservices[6070]: running: /sbin/chkconfig --list
Aug  1 05:33:44 localhost  last message repeated 2 times
Aug  1 05:33:50 localhost logdrake[6081]: ### Program is starting ###
Aug  1 05:48:12 localhost drakconf.real[6041]: modified file /etc/mcc.conf

Linux > Linus Torvalds

Odgovor na temu

mmirilovic
Mladen Mirilović
Čačak

Član broj: 10462
Poruke: 721
*.com
Via: [es] mailing liste

+1 Profil

Re: Nesto mi sumnjivo u syslogu...

^{01.08.2005. u 16:34 - pre 227 meseci}

Ako ti je sumnjiv prvi deo tokom konekcije, onda u pppd FAQ-u imaš upustvo
kako da podesiš syslog da detaljnije beleži proces. Meni se taj FAQ nalazi
u /usr/doc/ppp-X. X je verzija koju koristiš. Ako ga nemaš, javi se, poslaću
relevantan deo ovde na forum.

Što se tiče drugog dela (nakon prekida konekcije), zaista ne znam. Mislim da
je reč o nekim "mandrakolikim" skriptama. Moraćeš da pročitaš dokumentaciju
za tvoju distribuciju, koju ja inače nikada nisam koristio, da bi video šta
se događa. A možeš i da zaviriš u te skripte koje se pominju gore.
(drakconf.real, userdrake, logdrake...)

Inače meni u prvom delu log-a sve deluje OK.

Pozdrav.

Odgovor na temu