Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Epson stylus C43UX nece da stampa

[es] :: Ostali hardver :: Epson stylus C43UX nece da stampa

[ Pregleda: 5922 | Odgovora: 5 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

Transcont
Ivica Radosavljevic
Skopje, Macedonia

Član broj: 52387
Poruke: 68
79.125.244.*



Profil

icon Epson stylus C43UX nece da stampa25.02.2008. u 21:29 - pre 196 meseci
Stampao sam sa Epson stylus C43UX bez problema,
ali pred neki dan trebao sam istampati nekoliko lista i prva 3 lista istamale se bez problema.
Ali kad sam stavio 4 list, stampac nece da stampa.

Problem je sledeci:
Kad sam stavio list u stampacu i pustio da stampa, list samo prosao kroz stampac i nisto se nije istampalo.
Ali nakon sto prosao prazan list, od tada celo vreme naizmenico bez presanka trepkaju zelenu i crvenu sijalicku na stampacu i izbacio mi je sledecu poruku:




Service required

Parts inside your printer are at the end of their
service life. Contact your dealer for replacement.




Ovu poruku je i dole na sliku koji sam prikacio, znaci prikacio sam sliku sto mi pokazao status monitor kad stampac prestao da stampa


Zamolio bih vas ako mozete mi reci u cemu je problem i kako se moze resiti taj problem


Unapred hvala
Ice
Prikačeni fajlovi
 
Odgovor na temu

Fitiljce

Član broj: 147121
Poruke: 87
*.my-trion.net.



+1 Profil

icon Re: Epson stylus C43UX nece da stampa09.09.2008. u 23:08 - pre 190 meseci
Isto ovo pitanje sam htjela da postavim jer mi se identicno desava sa printerom Epson d88 +.

Da li postoji neko rjesenje ili je printer odradio svoje?
 
Odgovor na temu

Vill

Član broj: 37661
Poruke: 961
*.adsl.beotel.net.



Profil

icon Re: Epson stylus C43UX nece da stampa10.09.2008. u 11:36 - pre 190 meseci
Open up your printers Status Monitor, that is on your computer system and of course it will show up on your monitors screen. See if there is actually an error message listed, something like "Parts inside your printer at the end of their service life, contact your dealer for replacement", or "Parts inside your printer require maintenance or replacement, call your service company". If so, then the following information will apply...A Service Error where all LED's/Lights are flashing at the same time [some models the lights will be alternatly blinking], or where you get an "Unknown Error Message", or a "General Error Message", or even a message telling you that "Parts inside your printer at the end of their service life, contact your dealer for replacement", or "Parts inside your printer require maintenance or replacement, call your service company", is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the waste ink pad/pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer. You can see exploded parts diagrams for most epson ink jet printers and can also check on possible parts ordering, by Compass Micro Inc, at http://www.compassmicro.com/parts_select.cfm . Some people actually wash the ink out of the old pads, by holding them under running cold water. Then they simply dry them out and reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that waste ink counter reset procedure and performing it first, to make sure your printer will then work. You may be able to reset that waste ink counter, using the SSC SERVICE UTILITY available at http://inkjetprinterhelp.us/sscserve.exe . Unfortunatly, that utility only works using a windows operating system. You can check and see if your particular epson printer is compatible, by going to http://inkjetprinterhelp.us/epsonSSC.html ...Here's some previously posted info that may also help. "NEWUSER Re: Epson Error and power light flashing by newuser (4/5/05 11:10 AM). To reset the error download this utility: http://inkjetprinterhelp.us/epsonSSC.html . Once installed run the program and configure it, closing the main window and right clicking the icon in the tray area, from there choose Configure and select your printers model. After configuration, select Protection counter -> Reset protection counter, it should be able to clear the error message. If that does not actually work, then the only suggestion I can give is to perform a soft-reset before resetting counter. Remove also the Epson status agent, it detects errors and it may hinder communication with the printer, then reboot your pc. As profile choose the one sscservice didn't use after autoconfiguration, check for printer response. Remember that you should also clean the waste ink pads located at the printer bottom. For a more in-depth procedure by NEWUSER, go to his site at http://myprinter.altervista.or...lefaq/mysimplefaq.html#counter "....Unfortunatly, that ssc service utility may not actually work on all epson printers and not on all operating systems, so you will have to check it out for yourself. Just in case that source does not work: You may actually need to go on-line to try and locate the actual reset procedure, to buy and download to reset that waste ink counter...There is an "EPSON C64/C84 Disassembly Instructions Page", that you can view at http://www.inkjetprinterhelp.us/c648.html , that may be of some possible help. However, you will still need to go on-line and buy and download the actual Reset Procedure, to clear the actual Service Error Condition, if that SSC Utility does not work for you. There is an "Epson C63/C64/C83/C84 Service Manual" available at http://www.colorbat.com/PDF_Files/C84%20Service%20Manual.pdf , that may also be of some use to you.


Lepo ovo prostudirajte, i srecno.
Nekada je istina oko nas a mi non stop gledamo ili previse ispred ili previse iza
 
Odgovor na temu

Fitiljce

Član broj: 147121
Poruke: 87
*.my-trion.net.



+1 Profil

icon Re: Epson stylus C43UX nece da stampa10.09.2008. u 23:29 - pre 189 meseci
Krecem na studiranje mada mi se na prvi pogled cini jednostavnije kupiti novi printer. :))

Hvala Vill.
 
Odgovor na temu

Fitiljce

Član broj: 147121
Poruke: 87
*.my-trion.net.



+1 Profil

icon Re: Epson stylus C43UX nece da stampa11.09.2008. u 16:22 - pre 189 meseci
Rijesila sam problem pa da napisem i kako jer ce mozda nekome pomoci.

Probala sam sa programom SSC Service utility ali mom printeru on nije pomogao.
E onda sam pronasla rjesenje.
Ugasi se printer, istovremeno se pritisnu tipke za papir i boju i drzi se nekih 10-20 sekundi.
Zatim, drzeci jos uvijek te tipke pritisne se tipka za paljenje.
Printer nesto sam odradi i nakon toga ukljuciti Head cleaning.
 
Odgovor na temu

Vill

Član broj: 37661
Poruke: 961
*.smin.itsisp.net.



Profil

icon Re: Epson stylus C43UX nece da stampa13.09.2008. u 20:19 - pre 189 meseci
Svaka cast, hvala sto si ukratko to podelila sa nama.

Pozdrav i srecno stampanje
Nekada je istina oko nas a mi non stop gledamo ili previse ispred ili previse iza
 
Odgovor na temu

[es] :: Ostali hardver :: Epson stylus C43UX nece da stampa

[ Pregleda: 5922 | Odgovora: 5 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.