Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Povratak fotografije sa kartice

[es] :: Digitalni fotoaparati :: Povratak fotografije sa kartice

[ Pregleda: 4471 | Odgovora: 3 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

fotopetar
Vladimir Pavlovic
fotograf,petar
Lebane

Član broj: 192835
Poruke: 1
93.86.59.*

Sajt: elitesecuriti


Profil

icon Povratak fotografije sa kartice26.10.2008. u 20:24 - pre 187 meseci
Cao - dali neko zna kako da povratim slike sa XD kartice
Vladimir Pavlovic
 
Odgovor na temu

StORM48

Član broj: 22809
Poruke: 7536



+401 Profil

icon Re: Povratak fotografije sa kartice26.10.2008. u 21:34 - pre 187 meseci
GetDataBack for FAT, to je ono što Ti treba.

Pozdrav
 
Odgovor na temu

Abdee
Srdjan Abdijevic
Novi Sad

Član broj: 42836
Poruke: 1577
*.ADSL.neobee.net.

ICQ: 329875614


+1 Profil

icon Re: Povratak fotografije sa kartice26.10.2008. u 22:16 - pre 187 meseci
Za pocetak ti prvo treba citac kartica!

Za posle: ako ne uspe jednim, ne ocajavaj jos jer moze da uspe drugim programom. Probaj obavezno i: http://download.pcinspector.de/pci_filerecovery.exe
 
Odgovor na temu

Rade_mne

Član broj: 186661
Poruke: 27
62.4.36.*



Profil

icon Re: Povratak fotografije sa kartice28.10.2008. u 16:46 - pre 187 meseci
Na Linuxu sam to odma završio sa sljedećim uputstvom:

https://help.ubuntu.com/community/DataRecovery

Tačnije dio:
Code:

Data Recovery from damaged filesystem or drive

From /usr/share/doc/gnuddrescue/README

GNU ddrescue is a data recovery tool. It copies data from one file or block device (hard disc, cdrom, etc) to another, trying hard to rescue data in case of read errors.

Ddrescue does not truncate the output file if not asked to. So, every time you run it on the same output file, using a logfile, it tries to fill in the gaps.

The basic operation of ddrescue is fully automatic. That is, you don't have to wait for an error, stop the program, read the log, run it in reverse mode, etc.

If you use the logfile feature of ddrescue, the data is rescued very efficiently (only the needed blocks are read). Also you can interrupt the rescue at any time and resume it later at the same point.

Automatic merging of backups: If you have two or more damaged copies of a file, cdrom, etc, and run ddrescue on all of them, one at a time, with the same output file, you will probably obtain a complete and error-free file. This is so because the probability of having damaged areas at the same places on different input files is very low. Using the logfile, only the needed blocks are read from the second and successive copies.

ddrescue - copies data from one file or block device to another. It is a different tool that gnuddrescue. This documentation currently only applies to gnuddrescue.

If the filesystem you are imaging is greater than 4 gigs in size, you will not be able to use an MSDOS (VFAT) filesystem to store the image, since there is a 4G limit to the maximum size of a file on such filesystems. Use EXT3 or another filesystem that can handle such file sizes.

Use any method to install the following package:

gddrescue

Run gnuddrescue like this:

ddrescue [options] infile outfile [logfile]

So, if /dev/sda is unreadable, you will need to acquire another disk (or other media) onto which to save the output image. You will need to have more room on the new media than on the failed disk.

sudo ddrescue -r 3 /dev/sda /media/usbdrive/image /media/usbdrive/logfile

Run successive passes like this:

sudo ddrescue -r 3 -C /dev/sda /media/usbdrive/image /media/usbdrive/logfile

and gnuddrescue will use the log file to only read the gaps with errors. In both cases, the -r option determines the number of times gddrescue will try to read when it encounters an error (-1 = infinity).

Other examples:

These two examples are taken directly from the ddrescue info pages.

Example 1: Rescue an ext2 partition in /dev/hda2 to /dev/hdb2

ddrescue -r3 /dev/hda2 /dev/hdb2 logfile
e2fsck -v -f /dev/hdb2
mount -t ext2 -o ro /dev/hdb2 /mnt

Example 2: Rescue a CD-ROM in /dev/cdrom

ddrescue -b 2048 /dev/cdrom cdimage logfile 

write cdimage to a blank CD-ROM

Extract filesystem from recovered image

Now that the drive has been imaged, you can recover the filesystem from the image. If the filesystem is not recoverable, you can try to recover individual files.

Mounting partitions on the image

If you imaged the whole drive, you can mount the individual partitions on the image by using the "offset" option when mounting a loop filesystem. mmls from The Sleuth Kit can show you the partitions found within an image:

$ mmls file -b
DOS Partition Table
Offset Sector: 0
Units are in 512-byte sectors

     Slot    Start        End          Length       Size    Description
00:  -----   0000000000   0000000000   0000000001   0512B   Primary Table (#0)
01:  -----   0000000001   0000000031   0000000031   0015K   Unallocated
02:  00:01   0000000032   0001646591   0001646560   0803M   DOS FAT16 (0x06)
03:  00:00   0001646592   0002013183   0000366592   0179M   DOS FAT16 (0x06)

This shows several partitions. In this example, we want to mount the DOS partition starting at block 32. To calculate the number of bytes, multiply by 512:

$ bc
bc 1.06
Copyright 1991-1994, 1997, 1998, 2000 Free Software Foundation, Inc.
This is free software with ABSOLUTELY NO WARRANTY.
For details type `warranty'. 
32 * 512
16384
quit

Mount the partition:

sudo mount -o loop,offset=16384 file mnt

(32 multiplied by 512 byte blocks = 16384)

For mounting a typical NTFS partition created by Windows use:

sudo mount -t ntfs -o r,force,loop,offset=32256 file mnt

(63 multiplied by 512 byte blocks = 32256)
 
Odgovor na temu

[es] :: Digitalni fotoaparati :: Povratak fotografije sa kartice

[ Pregleda: 4471 | Odgovora: 3 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.