Imam masinu pII od koje želim da napravim router i da sa tog rutera podijelim internet na 1 windows mašinu.Na tu PII sam nabacio slackware 12.
Mreža ide ovako
accees point 192.168.0.1 ->(utp)->etho[192.168.0.2] | RUTER | eth1[192.168.1.1] -> (utp) na mrežnu od windosa [192.168.1.2]
ROUTER
- ifconfig eth0 192.168.0.1 netmask 255.255.255.0 up
-ifconfig eth0 192.168.1.1 netmask 255.255.255.0 up
/etc/rc.d/rc.firewall
Citat:
#!/bin/sh
# enable forwarding, tell kernel we don't have static IP
echo 1 > /proc/sys/net/ipv4/ip_forward
echo 1 > /proc/sys/net/ipv4/ip_dynaddr
# flush chains and delete user-defined chains
iptables -F
iptables -X
iptables -t nat -F
iptables -t nat -X
# Forward all outgoing traffic from internal network
iptables -A FORWARD -s 192.168.1.0/255.255.255.0 -j ACCEPT
# Forward only related incoming traffic
iptables -A FORWARD -d 192.168.1.0/255.255.255.0 -m state --state ESTABLISHED,RELATED -j ACCEPT
# masquerading
# One can masquerade using incoming interface name (-i eth1) or using source address (-s)
# This is right way (tm)
iptables -t nat -A POSTROUTING -s 192.168.1.0/255.255.255.0 -j MASQUERADE
WINDOWS
ip 192.168.1.2
mask 255.255.255.0
gateway 192.168.1.1
Što se tiče mreže ona radi, preko ssh se spojim na ruter i kreiram pppoe konekciju i ruter se spoji na internet pingam sa ruter google i sve radi, ali na windowsu još nema interneta.
Gdje griješim