Bit Rate:
5 Mb/s Tx-Power:16 dBm Sensitivity=1/1
moglo bi da se eksplicitno stavi 11 Mb/s ili 54 Mb/s zavisi kakav je onaj drugi ap?
ne znam tacno da li se radi na ath0 ili wifi0 interfejsu
http://madwifi.org/wiki/UserDocs/ChangingMode
ili samo
iwconfig ath0 rate 11M
jer ap-ovi ako nije na 11M ili 54M smanjuiju na 1kilobajt automatski,negde sam citao.
iz man iwconfig:
Citat:
rate/bit[rate]
For cards supporting multiple bit rates, set the bit-rate in b/s. The
bit-rate is the speed at which bits are transmitted over the medium, the user speed of the link is lower due to medium sharing and various overhead.
You may append the suffix k, M or G to the value (decimal multiplier : 10^3, 10^6 and 10^9 b/s), or add enough '0'. Values below 1000 are card specific, usually an index in the bit-rate list. Use auto to select automatic bit-rate mode (fallback to lower rate on noisy channels), which is the default for most cards, and fixed to revert back to fixed setting. If you specify a bit-rate value and append auto, the driver will use all bit-rates lower and equal than this value.
Examples :
iwconfig eth0 rate 11M
iwconfig eth0 rate auto
iwconfig eth0 rate 5.5M auto
drugo, postoji neki ACK za vece daljine ali nije to sigurno?
http://madwifi.org/wiki/UserDocs/LongDistance
原子公爵